01
Pin Map and Contact Functions
Define the function of each power, return, signal, control or detection contact.
This custom 6-pin rectangular magnetic pogo pin connector pair combines six spring-loaded electrical contacts with a compact mating interface for project-specific power, signal, communication, detection or identification functions. The Pin Map, contact pitch, working compression, spring force, magnetic retention, housing dimensions, terminal structure and device-side installation can be customized according to the approved schematic, PCB layout and mechanical drawing.
Product specifications should be reviewed together with the customer device, PCB, electrical assignment and mechanical mating conditions.
Define the function of each power, return, signal, control or detection contact.
Provide voltage, continuous current, peak current and required signal conditions.
Provide available length, width, height, PCB area and required mating orientation.
Provide application, expected quantity, environment and customer validation requirements.
Review the product-specific description, technical parameters, contact arrangement, mechanical structure and project conditions below.
Engineering Summary: This custom 6-pin rectangular magnetic pogo pin connector pair provides six project-defined electrical contact paths in a compact mating interface. The Pin Map, contact geometry, working compression, magnetic retention, terminal structure and device integration must be reviewed together in the approved project drawing.
The connector set includes a spring-loaded pogo contact side and a matching contact side. The pogo pins provide controlled electrical contact pressure, while the magnetic structure assists initial capture and retention.
Final alignment, contact compression and mechanical stopping should be controlled by the connector housing and device structure rather than by magnetic attraction alone.
| Assembly Element | Engineering Function |
|---|---|
| Six pogo pin contacts | Provide six spring-loaded electrical paths |
| Matching contact interface | Provides the corresponding mating targets |
| Rectangular housing | Controls contact position, orientation and installed height |
| Magnetic structure | Assists capture and retention during mating |
| Rear termination | Connects the assembly to a PCB, wire or device circuit |
Six physical contacts do not define one universal electrical architecture. The contacts may be allocated to power, ground, data, control, detection or identification functions according to the approved schematic.
| Possible Function | Required Definition |
|---|---|
| Power and return | Voltage, continuous current, polarity and temperature rise |
| Signal or data contacts | Protocol, data rate, reference path and shielding |
| Detection or identification | Logic level, connection state and mating sequence |
Engineering Note: Six contacts do not automatically confirm simultaneous charging and data transmission. Final performance depends on the Pin Map, connected electronics, contact arrangement and complete system validation.
| Specification | Product Definition |
|---|---|
| Product Type | Rectangular magnetic pogo pin connector pair |
| Pin Count | 6 Pin |
| Contact Layout | Single-row / drawing-specific |
| Contact Allocation | Project-specific |
| Mating Components | Pogo contact side and matching contact side |
| Mounting Method | PCB, wire, module or custom installation |
| Working Compression | Defined according to the contact and housing design |
| Current and Voltage | Confirmed through complete-path validation |
| Magnetic Retention | Defined according to mating and release direction |
Yes, when the Pin Map, conductor paths and complete electrical system are designed and validated for the required functions.
No. The contact count alone does not confirm USB, UART, I2C, CAN or another communication protocol.
Yes. Contact pitch, housing dimensions, installed height, terminal structure and mating interface can be customized.
No. Environmental protection depends on the connector housing, device enclosure, sealing structure and tested installation state.
Submit your Pin Map, PCB layout, electrical requirements and mating-interface drawing through the Get Quote & Samples page.
CTP can review the six-contact allocation, working compression, magnetic structure, terminal design and device integration before prototype development.
Submit your Pin Map, electrical requirements, available space, mating structure and project quantity for connector selection or custom development review.
Use the following engineering guides to compare contact count, contact allocation and connector layout before confirming the final product or customized design.
Review the complete selection path from contact count and electrical functions to connector shape.
View Main Guide →Compare one-contact special structures, complete two-contact circuits and third-contact functions.
Compare Low-Pin Designs →Determine whether four contacts are sufficient or whether a defined fifth electrical path is required.
Compare 4 Pin and 5 Pin →Calculate the contact budget and compare six-contact, multi-row and customized contact-array structures.
Compare High-Pin Designs →
