Magnetic Mating Interface
Confirm Pin count, contact allocation, magnet arrangement, connector shape, polarity control and mating direction.
Custom 5-pin magnetic data cable with a compact single-row contact interface and separate device-side mating adapter for electronic equipment. The magnetic structure assists capture and retention, while the five electrical contacts support project-defined signal, control, sensing or power functions. Data protocol, channel performance, cable construction, pin assignment and electrical ratings are defined by the approved system design.
The finished assembly must define the magnetic mating component, internal conductor arrangement, cable construction and the opposite-end connection as one complete electrical system.
Confirm Pin count, contact allocation, magnet arrangement, connector shape, polarity control and mating direction.
Define cable length, conductor count, wire specification, shielding requirements, jacket and flexibility.
Select USB, Type-C, DC plug, bare wire, terminal, PCB connection or another customized termination.
Confirm installation space, outlet direction, strain relief, exposed-contact state and user operation.
This 5-pin magnetic data cable combines an integrated cable-side magnetic head with a separate device-side mating adapter. Five electrical contact positions are arranged in a compact single row for project-defined data, control, sensing or power functions.
The magnetic structure assists initial capture and retention. Final mechanical seating should be established by the mating geometry, while the electrical contact system provides the defined connection between the cable and the device.
This SKU should be distinguished from a standalone magnetic connector. The cable construction, magnetic cable head, five-contact mating interface, device-side adapter and opposite-end termination form one complete electrical channel.
Cable length, conductor arrangement, shielding, termination structure and mating geometry can all affect final signal and electrical performance.
Five physical contact positions are arranged in one linear row within the rounded-rectangular magnetic interface. The five contacts provide five available electrical positions but do not determine their functions.
Signal, return, power, sensing, identification or control functions should be assigned through the approved customer pin map.
This cable is intended for project-specific data interfaces, but five contacts alone do not establish a communication protocol, data rate or signal-integrity performance.
The approved interface definition should identify the signal functions, return paths, protocol requirements, cable construction and the complete transmission channel.
A complete 5-pin map should define every contact position and the viewing direction used for the cable-side and device-side interfaces.
If the interface includes digital or higher-frequency signals, signal-to-return relationships should be reviewed rather than assigning contacts only according to available pin count.
Data performance should be evaluated across the complete channel:
Source Electronics → PCB Transition → Device-Side Contact → Magnetic Mating Interface → Cable Head Termination → Cable Conductors → Opposite-End Termination → Receiving Electronics.
Depending on the required protocol and data rate, the review may include return-path continuity, conductor geometry, shielding, impedance discontinuity, insertion loss and crosstalk.
A 5-pin magnetic cable should not automatically be described as USB, high-speed or a specific data-rate interface. Data capability depends on the complete pin map, cable architecture, contact geometry, PCB transitions and receiving system.
Protocol and data-rate claims should only be published after the complete cable channel is defined and reviewed.
A data cable may also include project-defined power contacts, but power capability should not be inferred from the presence of five contacts.
If power is assigned, current should be evaluated across the complete conductive path:
Source → Opposite-End Connector → Cable Conductors → Cable Termination → Magnetic Contact Interface → Device-Side Contact → PCB → Load.
For a complete path resistance Rpath, voltage drop follows Vdrop = I × Rpath and resistive power loss follows Ploss = I² × Rpath.
Magnetic capture, mechanical seating and a valid electrical or data connection are different interface conditions.
Magnetic attraction alone does not establish a valid data connection.
The separate device-side mating component includes visible side tabs or ears. Their exact function should be defined by the approved mechanical drawing.
The tabs should not automatically be described as precision locating features, anti-mismating features or structural stops unless those functions are specifically defined and validated.
If spring-loaded contacts are used in the mating system, they should operate within the working stroke defined by the approved drawing. Working stroke is different from the total available mechanical travel.
The mechanical interface should establish final seating so the electrical contacts are not used as structural stops.
Cable conductor count, conductor size, conductor arrangement, shielding, jacket construction and cable length should be selected according to the required electrical channel.
For higher-frequency or timing-sensitive signals, the cable architecture can be as important as the magnetic connector itself.
The opposite end of the cable is not visible in the reference image and should not be assumed. USB-A, USB-C, another device connector or a custom termination should only be specified when confirmed by the approved cable assembly drawing.
The opposite-end termination forms part of the complete signal and electrical channel.
A green internal insert is visible on the device-side mating component, but its material and function cannot be established from appearance alone.
A visible insert, gasket-like feature or recessed interface does not establish an IP rating. Any ingress-protection claim should apply to a defined and tested complete assembly.
This 5-pin magnetic data cable architecture can be evaluated for electronic devices requiring a compact detachable cable interface with five independently assignable electrical contacts.
Application suitability depends on the required data protocol, pin assignment, cable channel, mating geometry, electrical conditions and environmental requirements.
CTP can review project-specific requirements for cable length, conductor arrangement, shielding, cable jacket, five-contact pin map, magnetic head dimensions, device-side adapter, magnetic retention, opposite-end termination and mechanical integration.
Final signal performance, electrical ratings and environmental requirements should be released through an approved cable assembly drawing and validation plan.
This product is positioned as a magnetic data cable assembly for electronic devices. Any additional charging or power function should be defined by the approved pin map and electrical design.
Five electrical contact positions are arranged in one linear row within the compact rounded-rectangular magnetic interface.
No. Five contact positions do not automatically define USB or another communication protocol. The protocol and signal functions must be confirmed from the complete system design.
Not automatically. Data performance depends on the pin map, return paths, cable conductor geometry, shielding, connector transitions and complete transmission channel.
Mixed power and signal assignments can be evaluated, but the exact functions, current path, signal-return strategy and channel requirements should be defined by the approved pin map.
No. Magnets assist capture and retention. Valid signal connection also requires correct mechanical seating, electrical contact conditions and a complete channel that meets the project requirements.
Side mounting tabs are visible, but their exact fastening, locating or retention function should be defined by the approved mechanical drawing.
Its function cannot be confirmed from appearance alone. Any sealing function or IP rating should only be stated after the complete assembly and validation conditions are defined.
Provide the pin map, data protocol, target data rate, cable length, conductor and shielding requirements, opposite-end termination, electrical conditions, device-side geometry and available drawings for engineering review.
If this 5-pin magnetic cable architecture is close to your electronic-device interface requirement, submit the pin map, data protocol, target data rate, cable construction, opposite-end termination, mating geometry and magnetic requirements for engineering review.
Request Custom Quote & Samples | Review Related Magnetic Connector Interfaces
This product page presents a CTP magnetic cable assembly configuration for engineering reference. Final dimensions, electrical ratings, materials, magnet structure, sealing level and reliability targets are not universal values; they are confirmed against the approved drawing, installation condition and model-specific validation plan.
CTP reviews the application and prepares a drawing or specification for approval before sample production. Test scope, acceptance criteria and report format should identify the model, sample status, method, conditions, result and review date.
Yes. Customization can cover geometry, contact layout, materials, cable construction, magnetic structure, sealing and appearance. Feasibility depends on the application and approved specification.
No. Current, voltage, resistance, temperature rise and ingress-protection claims apply only to the identified model and stated test conditions.
Timing is confirmed after the drawing, materials, tooling, sample quantity, validation scope and production requirements have been reviewed.
A reference product image is not enough to define a cable assembly. Confirm the following information before drawing, sampling or quotation review.
The exact project route depends on whether an existing product can be used, modified or requires a new cable assembly design.
Confirm product scope, Pin Map, cable length, termination, quantity and application conditions.
Match magnetic contacts to conductors, source-side wiring and device-side functions.
Confirm dimensions, outlet direction, cable construction and required sample configuration.
Review electrical, mechanical and environmental conditions before production approval.
Submit the magnetic-end structure, electrical functions, cable length, conductor requirements, opposite-end interface, installation space and available drawings for project review.
Review related cable assemblies by contact count, shape, termination and project supply scope.
